GrainQuotaGrain capacity from your hardness and your household, not from a box label.

What size water softener for 6 people with 7 gpg water?

6 people, 7 gpg hardness
40k grain
3,150 grains a day — regenerating about every 8.5 days
6 people, 7 gpg hardness40,000 grainSoftener size3,150 grainGrains removed pe…
Softener sizethe number on the label is the maximum, at the worst salt efficiency40,000grain
Grains removed per day6 × 75 gal × 7 gpg3,150grain
Water used per day450gal
Days between regenerationsaim for about 7 — much longer and the resin bed channels8.5days
Usable capacity67% of nameplate, at an efficient salt dose26,800grain
Salt per regenerationat 3,500 grains per lb — an efficient dose7.7lb
Salt a yearabout 9 bags of 40 lb329lb

Notes

  • **Size by grains per day, not by house size.** A softener does not care how many bathrooms there are — it cares how many grains of hardness pass through it. 6 people at 75 gallons each through 7 gpg water is **3,150 grains a day**, and everything else follows from that one number.
  • **The number on the box is the maximum, not the working capacity.** A 40k unit only reaches 40,000 grains at the highest salt dose, where salt efficiency is at its worst. Run at a sensible dose it delivers about **26,800 grains** per cycle — which is the figure used above, and the one your salt bill will reflect.
  • **Regenerate roughly weekly.** Stretching the cycle to save salt lets the resin bed sit loaded and channel, so hard water finds a path straight through a softener that looks like it is working. This size regenerates about every 8.5 days.
  • **Add iron to hardness before sizing.** Every 1 ppm of dissolved iron behaves like roughly 4 gpg of hardness. A well at 7 gpg with 3 ppm iron is really sizing at 19 gpg, and skipping that step is the most common reason a correctly sized softener still delivers hard water.
  • Get a real water test first. Municipal water reports publish hardness for free; well water needs a lab, and the lab will also give you the iron and pH figures that decide whether a softener alone is even the right equipment.

6 people, 7 gpg water

3,150 grains a day. That calls for a 40,000 grain softener, regenerating about every {kq.chukỳ} days and using roughly 329 lb of salt a year.

Size by grains, not by house

A softener does not care how many bathrooms there are. It cares how many grains of hardness pass through it.

6 people at 75 gallons each through 7 gpg water is 3,150 grains a day, and every other number on this page follows from that one.

The number on the box is the maximum

A softener only reaches its nameplate capacity at the highest salt dose — where salt efficiency is at its worst.

Run at a sensible dose it delivers about 26,800 grains per cycle, using 7.7 lb of salt. That is the figure used above, and the one your salt bill will reflect.

Regenerate roughly weekly

Stretching the cycle to save salt lets the resin bed sit loaded and channel — so hard water finds a path straight through a softener that looks like it is working.

Add iron to hardness before sizing

Every 1 ppm of dissolved iron behaves like roughly 4 gpg of hardness.

A well at 7 gpg with 3 ppm of iron is really sizing at 7 plus 12, and skipping that step is the most common reason a correctly sized softener still delivers hard water.

Get a real test first. Municipal reports publish hardness free; well water needs a lab — and the lab also gives you the iron and pH that decide whether a softener alone is even the right equipment.

Nearby sizes